Technical data sheet Welding Flux SJ101G
1.Specifications:
AWS A5.17/5.23 F7A2-EM12K F7A4-EH14 F7A6-EG-G F8A4-EA4-A4
EN760 SA FB 1 55 AC H5
2.Description:
SJ101G is an agglomerated fluoride-basic type flux. Basicity: 2.0 (B//W) It is gray and round grain,mesh:10-45(2.0-0.4mm). It can highly satisfy the steel welding requirements for oil gas pipeline. Either AC. or DC.can be used, the wire shall be connected to positive pole when applying DC. It has steady arc and the welding bead smooth and pleasing , rice weld formation, and easy in slag removing as well with perfect deposit metal welding technological characteristics. It has higher low-temperature impact toughness and high crack resistance.
It should be re-dried under 300-350ºC for 2 hours. Rust,grease and moisture on the weldment should be removed before welding.
3.Applications:
Matching with suitable welding wires (H08C,H08MnA,H10Mn2,H08MnMoA,H08Mn2MoA),it can weld many kinds of steel pipes,such as X52,X60,X65,X70,X80,etc.It also can be used in 16Mn,Q345C etc structural steel submerged arc welding.
4.Chemical Composition(%)
5.Mechanical Performance of the Deposited Metal
Application:
Contact us:
1.Specifications:
AWS A5.17/5.23 F7A2-EM12K F7A4-EH14 F7A6-EG-G F8A4-EA4-A4
EN760 SA FB 1 55 AC H5
2.Description:
SJ101G is an agglomerated fluoride-basic type flux. Basicity: 2.0 (B//W) It is gray and round grain,mesh:10-45(2.0-0.4mm). It can highly satisfy the steel welding requirements for oil gas pipeline. Either AC. or DC.can be used, the wire shall be connected to positive pole when applying DC. It has steady arc and the welding bead smooth and pleasing , rice weld formation, and easy in slag removing as well with perfect deposit metal welding technological characteristics. It has higher low-temperature impact toughness and high crack resistance.
It should be re-dried under 300-350ºC for 2 hours. Rust,grease and moisture on the weldment should be removed before welding.
3.Applications:
Matching with suitable welding wires (H08C,H08MnA,H10Mn2,H08MnMoA,H08Mn2MoA),it can weld many kinds of steel pipes,such as X52,X60,X65,X70,X80,etc.It also can be used in 16Mn,Q345C etc structural steel submerged arc welding.
4.Chemical Composition(%)
SiO2+TiO2 | Al2O3+MnO | Ca O+MgO | CaF2 | S | P |
15-25 | 23-30 | 25-35 | 15-25 | ≤0.03 | ≤0.04 |
5.Mechanical Performance of the Deposited Metal
WIRE |
Yield Point Rel(MPa) |
Tensile Strength Rm(MPa) |
Elongation A (%) |
Charpy V Notch Impact Strength KV2(J) | ||
-20ºC | -40ºC | -50ºC | ||||
EM12K | ≥400 | 490~660 | ≥22 | ≥60 | ||
EH14 | ≥400 | 480~660 | ≥22 | ≥70 | ≥60 | ≥29 |
EG | ≥460 | 530~690 | ≥22 | ≥90 | ≥80 | ≥42 |
EA4 | ≥500 | 580~700 | ≥22 | ≥65 | ≥60 | ≥38 |
Packaging & shipping:
Company Introduction:
LAIWU HULIN WELDING MATERIALS CO.,LTD. is top three factory of Submerged ARC welding flux in China.
Factory was founded in 1994, quality systerm: ISO9001-2008.
Main products: SJ101,SJ101G,SJ301,SJ50,SJ601.HJ431,HJ107,HJ260 etc.
Application: Spiral steel pipe,API pipe, Structural steel, LPC Gas Cylinder, Pressure vessel, Boiler, Bridges etc.
Yearly capacity:30000mt
OEM & buyer label is ok. Technical support can be offered.
CUSTOMER'S SATISFACTION IS OUR HIGHEST PURSUIT.
LAIWU HULIN WELDING MATERIALS CO.,LTD. is top three factory of Submerged ARC welding flux in China.
Factory was founded in 1994, quality systerm: ISO9001-2008.
Main products: SJ101,SJ101G,SJ301,SJ50,SJ601.HJ431,HJ107,HJ260 etc.
Application: Spiral steel pipe,API pipe, Structural steel, LPC Gas Cylinder, Pressure vessel, Boiler, Bridges etc.
Yearly capacity:30000mt
OEM & buyer label is ok. Technical support can be offered.
CUSTOMER'S SATISFACTION IS OUR HIGHEST PURSUIT.
Contact us: